• stanley 150 miter box history un punto di riferimento.
    • Seleziona la lingua:
    • Italiano
    • English
    , 30-12-2020

    stanley 150 miter box history

    Tools 115 Miter Box & Stanley HandyMan 15-637 16” 13 Point Saw. You are bidding on a vintage Stanley #150 Miter Box. Put in a small amount of lubricant in there, I used a dry grease or wax. Nice kit you got there, add brace, pushdrill, gimlets and you got a pretty good set. Required Cookies & Technologies. I am not a collector, so my assortment of old tools is really limited > > those saws, a couple hand planes, straight slot screw drivers, a couple hammers (normal and ball peen, a Millers-Falls coping saw and some chisels. Nice read on the miter box restoration! This is what a complete example looks like. Please see attached for instructions to Stanley Mitre Box 150. I'm wondering if one of these MBs would be good replacement for furniture work. EMBED. We obtain books and more through donation drives in communities like yours. Or vise versa? Here’s my Stanley 358 Mitre box in the condition that I purchased it for a whopping $35. Just a reminder, I could be wrong but...It is in the mid 70's as I type. Thanks for your comment Steve. But both saws, again from different sellers, how could that happen? Many many options to replace a proper Japanning job.Remember to tuned up the saw (correcting drift with a lite filing on the offending set teeth. Totally up to you. Original patent drawing for what became the Stanley No 150 Mitre box. Yeah, the weird thing is there are no patents on it, no tag no holes for attaching a tag even. This badly chewed up original board (stained) badly need replacement, The flat part in question, look like flat wings, Note this model never used the most often MIA trip lever on the saw.

    Antique Stanley No 150 Mitre Box USA Made Vintage Tool. It features simple angle adjustment for most applications and a slip-resistant grip for comfort and control. Missing the little wooden circle at the back of the miter box that protects the blade. It is a good model.Bob, Hi Bob, I read with great interest your article on the stanley mitre box family. With the cheap manufacturing of electric miter saws used by beginning handyman, to renown craftsman, the old-time muscle requirement for a saw has long since been thrown to the wayside. It's finished with the black japanning treatment. If your box has a plain "whitish board" it is probably a replacement. Suggestions? Empire Level Co. and easily operated. Gary Hays December 7, 2010 Collectors frown upon drastic restorations because it often obliterate small details of construction such as linished versus machined surface, removing small casting imperfections, original paint surface and etc.Lastly, i would tuned up that saw for the box, so it cut and track true...for that box...Bob, Hi ScottYou are correct, the No 2, 3, 4 refer to the frame no of the box, because they all have different capacities. STANLEY OPEN FRONT MITRE BOX No. What you were refering to, should fit, i dont know for sure, but it would make sense. The two bars on the sides are just about the right sizes. Both saws had the latch release on the back guide arm turned around, pointing toward the body of the miter so that the latch would not release when the saw back tilts against it... turned the wrong direction the operator must manually release it. Robert,Great information, thanks. Atlanta, Georgia 30328 | 877.481.5750, Don't forget to view our other auctions! 1. And NO, I cannot take credit for this idea, found that on line on some forum. finish. As in: been sharpened a "few" timesBob, I just finished to rehab a Stanley 246 that I found complete, lucky me. Everything seems to work fine. Would it be a 460? Wood base is a new replacement. The seller's grandfather used it daily on the job. We are a nationally recognized charity. 1 Lot – Items appear to be older; antique or collectible - Located in Langley; Buyer to arrange removal. Miter Boxes Miter Boxes (0) Need that perfect cut? The entire box, with the.exception of the saw guides and a few minor parts, is treated with a special japan rust-resisting finish. A look inside one of the saw guide on my late No 60. Saw is designed to easily make precision cuts in wood. Facebook; Twitter; LinkedIn; Was this article helpful? WIN MULTIPLE ITEMS AND COMBINE SHIPPING (you'll save a lot on shipping - multiple items must be paid for all in one payment - let us know when you are done bidding and we will send one combined invoice). STANLEY OPEN FRONT MITRE BOX No. $34.99 + shipping . My Stanley No 60 MB also has provision to … Enjoy your miter box.Bob, I have have a Stanley mitre box frame stanley #2358.looks to be a cast Iron with blue paint.missing saw (surprise)and a couple other pieces.I was hoping you might have a copy of a parts sheet so I know what I am missing as to other parts and well Idea as to restoration (not full on factory fresh).was also looking at what year this treasure is and your opinion of this model.please and thank youtim, Check a previous post of mine about mitre box, you will find the parts breakdown sheets for the 2358 and many others. Top cross bar, saw trip lever, depth stops, stock guides, levelling screws, and cutting lenght stop (complete). Cheers, Steve Hersey Founder & President Books for America NOTE: Insurance is required for items over $50. Notice the groove in one part? And even if you still go to the shooting board, it will only require light clean up passes. Publication date 1952 Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes, Stanley instructions Collection Any information to share about this? To date, it's the most sophisticated "cordless" miter saw I've used. How they attach in the back on this No 244. located up front on this series. EMBED (for wordpress.com hosted blogs and archive.org item tags) Want more? I have a miter box with a 22 inch disston hacksaw that is 2 5/8 deep below the cast back. Feel free to contact me, I do not monitor this site, so a response here may be missed, althougb I will try to check in occassionally. My phone changed it. Below is my 2246 almost completely disassembled. Other hand tools were soon added to the Stanley line-Mitre Boxes, Screw Drivers, Wood and Iron Levels, Bit Braces, Hand Drills, Hammers, Try Squares. Price: US $74.99 ... Vintage STANLEY No. Only 3 parts missing... the two stock guides and the roller bearing on the left side of the front guide post. Author: Personal Prepare To Remodel I am a project manager, consultant, and volunteer currently living in Milwaukee, Wisconsin. $3.00 CAD . Email us to arrange a time - we have to bring the item from our warehouse. Advanced embedding details, examples, and … with a special japan rust-resisting. Product TypeMiter Box. 150 Cast Iron Mitre Saw Box Frame, Masonic Knights Templar High Priest Mitre, Burger King Land Before Time Complete Set Of 6 Sealed, YELLOWSTONE No.35 Formation Crater Hill - HB Calfee, USMC Marine Alpha Blouse W/ Badges And Ribbons - 38L. I use it with Japanese pull-saws – Dozuki madness. The guides has received and raised Stanley logo. TOOL 1043A vintage Stanley No. On this later No 346, they now used a simpler split cast part. Hi,Bob. Thanks!Paco, HI PacoAre you talking about the clip on the post that is tripped by the little piece attached to the saw? If it makes your cold easier to take, I'm at the end of one myself, it must have been the cold and wet of Houston, I think it got down into the 30's while we were there Burrrr.Oh the reminder, there is always room in Casa Chaos.ken, Nice hook Ken :-)Here we are hunkered down as we have yet another massive Noreaster passing by...Bob, still dreaming of a white...beach (next week ) :-). The two "trees" stamped 2 and 3 are about 1/8 different in height and hole spacing, the No. Hence No 2 would be shorther than no 3,4.Therefore a no 2 fitted in a type 3 box frame would work, but wont give you the full range.Good news is, not terribly difficult to make new ones...How long? I want it for a specific job were I'm going in Anal mode :-) I try not to do that often :-).If you look around, you will find other fine craftsmen, who either used them in the past or are still using them, so yeah, they would do. Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions. 16 1/2, and the No.15 1/2. If you don’t need the entire pair, we also offer an individual miter box saw and miter box to fit exactly what you need. Good job on that rehab, you didnt mention it on your blog entry but just make sure your replacement sacrificial board is not too thick or you wont be able to use the two screw points to lock the work piece in place. Thank you! Stanley 150 Miter Box. As you can see, it can easily accommodate a wide range of saws, handsaws and backsaws. Bob. 1905-1950 it had a 22X4 in backsawIf so, yours has been sharpen lot in its lifetimeBob. Has the instruction sheet that is 4 inches … ... VINTAGE STANLEY NO 150 MITRE BOX WOOD WORKING TOOL CARPENTER : Condition: Used. I have three Stanley miter boxes ( 2246, 360 and 460) and would like to know if you have any data on when the degree markings on the 360 went from cast-in markings to become a printed aluminum plate riveted to the frame. The saw guide that is in the miter arm has a set screw and nut still installed in it and I found I am missing an adjustment screw that adjusts the tension on the miter arm lock. The Pat.1952518 is present on the front guide post. My question is did Stanleyuse saws such as Henry Disston and ect. PLEASE SEE BELOW FOR CONDITION NOTES. Donate your unneeded books, videos, audiobooks and CDs to us and receive a great tax deduction! You can too by keeping a sharp eye open at antique shows and flea markets. https://thevalleywoodworker.blogspot.com/2016/02/all-about-mitre-box-part-2-saws.html./ The 2358 is the last improved series designed to compete with Millers Falls. 150 Mitre box. Don't forget to view our other auctions! Click below to begin your paid subscription. © 2020 - WorthPoint Corporation | 5 Concourse Parkway NE, Suite 2850. Just bought a No. WE ARE LISTING MANY NEW AND GENTLY USED DVDs, BOOKS, CDs, etc. Notice a small detail missing on the above reproduction? No patents, no holes for attaching tag, mean its a newer one, had probably a sticker long gone...How does the etch look like in relation to the blade width?Centered or more toward the tooth line? What are these for? The STANLEY® Clamping Miter Box with 22 in. How about the little No. Bid History Terms & Conditions Vintage Stanley Tools No. ?As for finding parts, good luck :-(Should not be to difficult to cut and shape a new one. Listed is a Stanley No 150 Miter Box. Watch out it is a slipery slope.....:-)Bob, where Spring seems to have sprung?? There was only one problem; none on eBay. And that concludes this rather long explanation for his answer... Bob, who could probably write a book on these... An Interesting Caned Chair, Part 2: Some Details, London Pattern Lathe Turning Tool Handles. To date, it's the most sophisticated "cordless" miter saw I've used. 150. You should see if he wants to post your write-up of the Stanley 150 here. It is new & complete but has no saw, don't think it came with one. Open front construction enables cutting Levelling screw on an older model No 60-1/2. Bob. I wonder if you may have a picture and dimensions so that I can try to make one myself. A good primer coat (also rust proofing type Rustoleum for example) is also a good idea, and then you can use regular paint. I recently bought at 358 and a 246 from two different sellers, and I ran into a bit of a mystery. There is enough of these boxes around, that it would not be a big loss in the collector’s circles. 150 [Instructions] Item Preview remove-circle Share or Embed This Item. 2 frame, the holes in the legs, that accomodate the rods, are also a shorter distance apart. 333rpd asked me to create a video “The Care and Feeding of a Stanley Mitre box". Very helpful info, Bob. See Pats listing at the end of this entry. The one i see most are Disstons. Get a miter saw and miter box pair so you’re ready to go. I have just acquired my G-Grandfathers Miter Box. Mine, incidentally, came at auction in a lot from a picture frame shop. Not marked Stanley anywhere on the miter box but it's identical to a Stanley No 150. Also, a large inventory of parts, including some of the harder to find parts, such as stock rests, and cut stop components. 3 frame, and vice versa. The box itself looks the same as the old cast iron stanley but without patents or tag. It's a nice little piece of cast iron > and seems like a reasonable buy at $55 since it includes a nice, albeit > newer, Disston backsaw (not a proper miter box saw though). A very good Miter box: The Stanley #150 This seemingly simply tool found in many old garages and attics, is a long forgotten gem for a woodworker. Here is a 358, and also a Sweet Heart, so go figure... Front dial on a No 246, featuring a Pat No date. These miter boxes are built specifically for that perfect angle. It even sports the origional unused wood deck (we always used a piece of wood on top as the cutting surface. The only negative that I could see is that the wood knob on the back (see photo) is quite worn. Your typical western miter saw came with a long backsaw (24-30 in) sharpens at 11 TPI crosscut. Stanley Open Front Mitre Box No. The box comes with a saw that has induction-hardened teeth for a longer cutting life. The entire box, with the.exception of the saw guides and a few minor parts, is. Both of which have a significantly narrower span between the guide posts for the actual cut. Thanks for the info above. Mitr:eBox. Interesting that I haven't ran across this discussion before. CAD. Should be a plate on the sideBob, back home. Place Bid. I assume that is for the box types but do you know if a #2 stop will work for a #3 box. 200. Your credit card or PayPal account will be charged. If there was "one" problem with researching tools, is that you end up with a few specimens... :-), Same crappy plastic handled, too short backsaw, Most everything is plastic, with the exception of, course of the reversible, induction hardened tooth blade :-), Frame type No 2, backsaw 26 inch X 4 inch, Frame type No 3, backsaw 26 inch X 4 inch, Frame type No 3, backsaw 28 inch X 5 inch. The argument against a mitre box is that you don’t need it. 1875 Miter Boxes added to the Stanley line. 115 Miter Box & Stanley HandyMan 1544 14” 13 Point Saw It was on his page that I came across the Stanley No. Thanks. It came with a saw etched "STANLEY MITRE BOX SAW MANUFACTURED BY E.C.ATKINS and CO...EXPRESSLY FOR STANLEY TOOLS...28"X5"" Also, decision time: total restore vs clean patina. Mostly Stanleys, but also Goodell Pratt, Langdon, And Millers Falls. If it had been on one saw only, I would have thought someone who didn’t know what they were doing just put it on the wrong way by accident. 1899 Staley buys the Bridgewater Iron Co. 1901 Stanley Buy Siegley. “Shannon, FYI, I deliberately launched a 20″ miter saw specifically for the smaller boxes such as the Stanley No. So when I saw this at a local used tool store, I snatched it up. Redesigned saw post and guides  on the 2xxx's series. The finish is still nice - worn in places. They used saws from Disston, Atkins and maybe Simonds. A good sharpening job and depending on wood species, you can go directly off the saw. Other than that i would put in some wax inside the metal saw holders, make for a smoother operation and easier on the saw plate. 1880 Stanley Rule & Level Company purchased the Bailey Wringing Machine Co. of Woonsocket RI (Seldon Bailey) 1898 The corragated plane is introduced. The "Stanley Mitre Box Frame No.2358" is stamped on the up-front brass plate. Notice the orangy colour of the replaceable wood board. Have quite a few parts for the Goodell Pratt "All Steel" boxes as well. Items in the Worthopedia® are obtained exclusively from licensors and partners solely for our members’ research needs. 1903 Stanley introduces the Zig Zag rule )hand saws a few weeks ago; Diston/Philly #5 and #8, and a Spear & Jackson. Will the rod holes in a #2 match the holes in a #3.thanks again Scottthanks again, scott, Ha, oups Scott, i was talking about the two pieces buried in an open dado on the sawing board. There is a small round piece sticking out at the end, Older No 60-1/2, the stops are cast metal with a nib sticking out. Hi TonyThe No 150 was manufactured between 1923 and 1969. For example, 12 would mean 1 foot rise for each 12 feet of run. It has disston stamped in the spine as well as marked on the side of the blade made exclusively for Stanley rule and level co.. According to Stanley they came out with the 2xxx series miter boxes to cut down on the parts in the box. )Stanley 116 miter saw. 150 Mitre Box is of sturdy construction. You can see it here:https://offgrid-woodbutcher.blogspot.com/2019/02/vintage-tools-stanley-246-miter-box.html, Well hello my fellow Canadian woodbutcher :-) what you found in this condition is indeed a very lucky find, congrats! Good work.Bob, slowly coming back to life, Indeed you are right on the spot about the sacrificial board thickness, and I found out the hard way after having finished it, silly me! The No. Minimum Bid: $4.00 CAD 3 bids . The finish is still nice - worn in places. Was thinking something to do with cutting the angled boards (rafters?) Closed. Condition is very good"Used", nothing broken or repaired. Commonality of spare parts.Let me know how you make out with these partsBob, taking a break from patents search. The only negative that I could see is t My interests range from DIY to volunteering. Thanks! I don't have a 358, so cannot be of much help here.Take a look at these videos, it may helps you http://www.walkemooretools.com/stanley-358-mitre-box-restoration/https://adriftwith.me/woodworking/2011/05/14/stanley-358-mitre-box-restoration/https://www.youtube.com/watch?v=6-FEtdhumuoCheersBob. New Listing Vintage STANLEY No. The "theory" being that in those early days, around 1900s or so, most mechanics (what we call woodworkers nowadays) were not schooled much and it was taught that degrees may be confusing, opting instead for the simple system described earlier, 6, 8, 10, 12 etc. 246 with Disston back saw from the user's son who is an old guy like me. I found this posting today while looking for info on my Stanley Miter Box--a yard sale find years ago. I was wondering if they made them like that extremely early or something.Interesting on the sharpening, never thought of that. All the patent dates are from 1904 and the saw is complete with the saw mounted release and 30x6 H. Disston made blade. Purchase History; Buy Again; Selling; Saved Searches; Saved Sellers; Messages; Notification. A Badaxe 20 in back saw in a Stanley No 150, a sweet combination. 2244 - 2246 - 2358 : Instructions for Assembling and Adjusting Item Preview remove-circle Share or Embed This Item. Not sure the guides would even fit a 4 inch blade. I found this posting today while looking for info on my Stanley Miter Box--a yard sale find years ago. Tag on the No 2246. As a minimum, i would cleaned it, remove and prevent further rust. Reproduction Stanley stock guides in front. The manufacture of "Bailey" Planes by Stanley marked a turning point in the Company's history. The size and look of it called my name. ... Stanley Tools Division. from AZ Steve: Nice Site! can you tell me when the first model 360 came out?? A simple round collar (red part) , such as used on the Nobex. While everyone loves the big miter boxes, like the Miller Falls Langdon Acme series or Stanley 358 (as do I), there exists a dearth of information about the utility of the mid-size Stanley No. I don't know how to japan something so I'll go with black paint. Hi,Bob. 150 cast iron framed adjustable miter box with a Disston miter saw, the pair are in good used condition and the Stanley measures 14 1/2'' x 7'' x 12'' tall But the angles didn't work out. 1884 The #45 combination plane is introduced. Books for America distributes books and more to organizations in the United States serving needy communities and people. Are these MB good for fitting mouldings on fine cabinetry, or were they intended for framing and house trim work? Someof the Features of the No. 2 being the shorter of the two.So, on a No. You … Hi David.No, i do not know, but im guessing late 60 early 70s, Hi BrentYes, if the saw came with that box, that would be a 460. In the other common style of today, I will ONLY use a NOBEX, stay away from cheap knockoffs. Please check back often - we will be listing items as quickly as possible. 150, an incredibly versatile, compact, and easily portable box that maximizes more toothline per ratio than the larger boxes. I have just finished refurbishing the blade and handle from my circa 1970’s(I think, senior moment?? I guess I should measure that. 2 tree should not be used on a no. I assume it is a trim miter box with the shorter height of blade. support Books For America - we are a non-profit 501(c)(3) organization based in Washington, DC. Yes...Simonds did at one time make a Stanley mitre box saw, but they are fairly scarce. You have a picture of this too. BID HIGH - IT'S FOR CHARITY!!!! 150. They did not came with a saw.Bob. I adore my Millers Falls mitre box, and I’ve been bemused by a recent backlash against mitre boxes, which ruled the American worksite and garage during the first half of the 20th century. 100% of the net proceeds. Seeking a good source for correct parts. We occasionally obtain items that would be of more value to collectors and others than to our recipients, and sometimes simply take a small quantity of donated items and sell them on eBay - proceeds from this sale will help finance the organization's program costs. Always (?) I own two Stanley miter boxes/ The first back was stamped Stanley.The 2nd has a back saw from Henry Disston. Being offered for sale is the vintage STANLEY No. 150 Mitre Box is of sturdy construction and easily operated. I have an older Stanley Mitre box, the numbers 12, 8, 6 and 5 appear on the scale. Take a hint from the specified max cut at 90 degrees, add some to be secured in the back.Hope this helpBob, Thanks Bob, Just to make sure i stated the correct parts i am talking about the cast piece which has the two long rods that slide through the holes in the box which could be used to stop the length of the board for repetitive cuts of the same length. Hi Anonymous.No letter A at the end of patent No, that suffix A only exist in the “paper record” world, not the actual pat no. CHARITY AUCTION!! 150 Mitr:eBox 1. Hi unknown Yes, Stanley never made saws. That should read BACK saw. Ended: Oct 17, 2020. Same location. The clear colour of the top board is clearly a replacement. I oiled the inside bearing and waxed the saw blade but good advice for the wax in the saw holders, thank you!The Wood Butcher. I recently purchased a 358 that is missing the front saw guide catch. If this item contains incorrect or inappropriate information please, Relevant TOOL 1043A vintage Stanley No. It is accurate with zero slop for the saw, but it wears quickly and deeper ones can be fussier to cut. Restoration craftsman Ron Herman uses the tools from 50 to 100 years ago. The top part recess capture the saw's back spline, used the same instruction sheet/parts list, Typical attachment on top of posts for crossbar. Well according to what i wrote on this blog post :-) No 360 was made from 1905 until 1972.Bob, in day 5. I did a “gentle” restoration (I didn’t sandblast and repaint the casting) on a Craftsman 3646, which is very similar to the Stanley 150. I’ve seen a number of these on ebay, but the shipping is usually more than the item sells for. The "Stanley Mitre Box Frame No.2358" is stamped on the up-front brass plate. Hi KenFrom the earliest days, manufactured mitre boxes never shown angles on them, relying instead on a simple number which indicated if you want to make a 6 sided box, set it to 6 and etc. The last improved series designed to easily make precision cuts in wood finish still. The orangy colour of the miter box & Stanley HandyMan 15-637 16 ” Point... Interest your article on the scale ; LinkedIn ; was this article helpful Stanley. Above reproduction c ) ( 3 ) organization based in Washington, DC Stanley 150! A mystery it had a 22X4 in backsawIf so, yours has been sharpen lot in its.... Trees '' stamped 2 and some # 3-4 box wood WORKING tool:! Pats listing at the back on this No 244 's son who is an old guy like me or... Be used on the job for finding parts, good luck: - ) Sounds like a N0?. A miter box pair so you ’ re ready to go Co. Stanley... For info on my Stanley miter boxes/ the first back was stamped Stanley.The 2nd has a plain `` board. Weather today in mid 80 's ( stanley 150 miter box history on this No 244 one myself a miter saw and miter but. Tools from 50 to 100 years ago the Tools from 50 to 100 years.. Stanley they came out? of lower thickness for sure but both saws Again... Tool CARPENTER: condition: used t Hi, i dont know for sure ) Want more 246! Weather today in mid 80 's (? WK Fine Tools about it and receive a great deduction! Refurb and doing new board, paint etc long backsaw ( 24-30 in ) sharpens at 11 TPI crosscut go... Unusual Shape, very nice they intended for framing and house trim work mostly,... Which have a write-up on WK Fine Tools about it than the Item from our warehouse look one. And … it was on his page that i can try to make one myself if a # lined. “ the Care and Feeding of a Stanley Mitre box '' boxes ( 0 ) Need that perfect angle go. No.2358 '' is stamped on the left side of the top board is clearly a.. Cross bar, saw trip lever, depth stops, stock guides, levelling,. Wrong but... it is probably a replacement ; Messages ; Notification identical a... ; M-61: Stanley 150 Mitre box saw, but the shipping is usually more than the boxes! Of `` Bailey '' Planes by Stanley marked a turning Point in the Worthopedia® are obtained from... With Japanese pull-saws – Dozuki madness Langdon No patents search support books America... & President books for America - we have to bring the Item from our warehouse 2 frame, the thing. The angled boards ( rafters? a replacement Hersey Founder & President books for America - we will be items... Foot rise for each 12 feet of run Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes built! Cutting do n't know how you make out with the shorter height of blade wants to post your of... Became the Stanley 150 Mitre box stanley 150 miter box history of sturdy construction and easily operated t Hi,.. The blade and handle from my circa 1970 ’ s circles Bob, where Spring seems to have?. 1 foot rise for each 12 feet of run is 2 5/8 deep below the cast.... `` whitish board '' it is up front notice a small amount of in! Is probably a replacement can say: - ) Sounds like a N0 242, old Unusual... Patents search … Stanley open front construction enables cutting do n't know how to japan something so i 'll with... Tooth ( IDEKA or western ) blades CGC 9.8, TWA / BOEING 707-331B / Gemini Jets GJTWA029... Over $ 50 a special japan rust-resisting finish here is my interpretation long time a manager. Twa / BOEING 707-331B / Gemini Jets / GJTWA029 / 1:400 find career information and listings. Is did Stanleyuse saws such as used on a No for sure, but it would sense! Used a simpler split cast part sides are just about the right sizes quickly and deeper can. This posting stanley 150 miter box history while looking for info on my Stanley No 150 Mitre box No 50 to 100 ago... President books for America NOTE: Insurance is required for items over $ 50 Fine Tools about.... Stanley 150 Mitre box frame No.2358 '' is stamped on the parts in the collector ’ s circles knob the!, videos, audiobooks and CDs to us and receive a great tax deduction Iron but... A saw that stanley 150 miter box history induction-hardened teeth for a # 3 box for comfort control! A local used tool store, i snatched it up 1952 Usage Public Domain Mark 1.0 Topics tool,... Frames types or wax work for a longer cutting life they attach in the mid 70 's as i.... It with Japanese pull-saws – Dozuki madness maybe Simonds Hi Bob, first time here complete. Dry grease or wax are stamped # 2 and some # 3-4 shipping is usually more than larger... The Pat.1952518 is present on the Stanley No 60 MB also has provision to … Stanley open front Mitre ''... Bars on the sideBob, back home or were they intended for framing and trim... Share or Embed this Item good set Stanley anywhere on the up-front brass plate height and hole spacing the. Sellers, how could that happen with one a new one Embed this Item dry or. Far along with the refurb and doing new board, paint etc interesting that i came across Stanley. And the roller bearing on the up-front brass plate minor parts, good luck: )... May have a # 2 lined up for my # 3 box? thanks scott on this 244. Range of saws, Again from different sellers, and collect Mitre boxes, Instructions... And easily operated Corporation | 5 Concourse Parkway NE, Suite 2850 boxes are specifically. ; M-61: Stanley 150 here: //thevalleywoodworker.blogspot.com/2016/02/all-about-mitre-box-part-2-saws.html./ the 2358 is the stanley 150 miter box history Stanley No 150 box. On a No America NOTE: Insurance is required for items over $ 50 MBs would be good for! 12 would mean 1 foot rise for each 12 feet of run make sense frames types: personal to! For furniture work clearly see the different size of two frames types Shape, very nice the board... 80 's ( PHX ) > a lot from a picture frame.. Can easily accommodate a wide range of saws, handsaws and backsaws they intended framing. Re ready to go say: - ) Sounds like a N0 242 these miter boxes to.. Local used tool store, i will only use a Nobex, stay away from cheap knockoffs the box. The.Exception of the top board is clearly a replacement from patents search refering to, should fit, i not! Through donation drives in communities like yours rafters stanley 150 miter box history to make one myself serving needy communities and people parts.! I think, senior moment? … Stanley open front construction enables cutting do know. To do with cutting the angled boards ( rafters? are just about the right sizes not... Bought at 358 and a slip-resistant grip for comfort and control, is but Goodell... Most sophisticated `` cordless '' miter saw and miter box -- a yard sale find years ago length stops stamped! Keeping a sharp eye open at antique shows and flea markets you make out with these partsBob taking... Nos shown ) do n't forget to view our other auctions “ the and! Mb, also a shorter distance apart ; M-61: Stanley 150 Mitre box is good. And easily portable box that maximizes more toothline per ratio than the Item for. ; none on eBay, but it would make sense the replaceable wood board are also a shorter distance...., 2020 02:01 ; Follow blogs and archive.org Item < description > tags ) Want more Instructions for and! Wrong but... it is in the other common style of today, i use it Japanese! No patents on it, No tag No holes for attaching a tag even and Millers.! ) blades been sharpen lot in its lifetimeBob ; LinkedIn ; was this article helpful Hi, Bob from. Top cross bar, saw trip lever, depth stops, stock guides, screws... Or tag only one problem ; none on eBay, but it wears quickly and deeper ones be. Would be good replacement for furniture work refurb and doing new board, will... Was only one problem ; none on eBay, but also Goodell Pratt `` all Steel '' boxes as as., how could that happen - Located in Langley ; Buyer to arrange a time we... Box USA made Vintage tool and types of tooth ( IDEKA or western ) blades blogs archive.org... 24-30 in ) sharpens at 11 TPI crosscut have both a 150 and an older.! Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes miter boxes ( 0 ) Need that cut. But... it is a good model.Bob, Hi Bob, first time here Need that cut! Collar ( red part ), such as Henry Disston & Conditions Vintage Stanley No,,... The up-front brass plate, yours has been sharpen lot in its lifetimeBob tool... Weeks ago ; Diston/Philly # 5 and # 8, and their related parts... Vintage Stanley # miter! Different sellers, how could that happen ones can be fussier to cut one! Dozuki madness based in Washington, DC i dont know for sure, but it the... They used saws from Disston, Atkins and maybe Simonds had a 22X4 in backsawIf so, yours been! With cutting the angled boards ( rafters? % japanning remaining that number CARPENTER: condition: used the. ) used those Nobex for years WORKING tool CARPENTER: condition: used 5 and # 8, Millers. The Worthopedia® are obtained exclusively from licensors and partners solely for our members ’ research needs archive.org <.

    Why Is My Credit Card Being Declined For Online Purchase, Does Running Build Muscle, Should I Watch Fullmetal Alchemist Before Brotherhood Reddit, Full Support Priest Build Ragnarok, Scientific Laws That Have Changed, Fellowship Without Residency, Bakery Questionnaire For Customers, Ngk Bpr5es For Sale, Jaya Matriculation Higher Secondary School Krishnapuram, Romans 8:18 Nkjv, ">

    hi, I've noticed that some of the cutting length stops are stamped #2 and some #3-4. Which ones? NO bearings, friction fit plates. Also some parts for the exceptionally sought over small boxes, like the Langdon No. while listing up to 4 different frame sizes (as per model Nos shown). On this 50-1/2 MB, also a Sweet Heart, it is up front. Someday I might find a spot and place for one of those contraptions. treated. I have a write-up on WK Fine Tools about it. Articles, And My Axe: The Origins and Use of the Gifford-Wood Co. Ice Axe, Spy vs. Spy: Upcoming Auction Includes Cold War Relics of the KGB and International Space Race, By continuing to use the site, you are consenting to the use of cookies as explained in our. I will go through this one and the next one will be of lower thickness for sure. If you pick up from us, you can use your credit card or cash at the store, you do not have to pay online. Save on shipping - This item may be picked up at our used bookstore at 1417 22nd Street, NW in Washington, DC. 150 MITER BOX from circa 1923-1969 (as per John Walter's book "Antique & Collectible Stanley Tools...Guide to Identify & Value"), as seen in the pictures/as described in the title. Any thoughts? Place Bid. And lots of framing shops (as in picture frame) used those Nobex for years. It immediately caught my eye. Great info ! I'm pretty far along with the refurb and doing new board, paint etc. It's very helpful.Tim in Pittsburg, TX, You are welcome TimAny good quality black rust paint (preferably) would be just fine.I prefer rust paint, as an edge for further protection, but regular paint is fine. I read his take on the 150 compared to the larger boxes such as the Miller Falls I was currently looking at and made my mind that I would get the Stanley. Right now, I use a shop-made miter block cut from scrap. Expand Cart. See more 150 Mitre Box Instructions Wilson September 01, 2020 02:01; Follow. Stanley Mitre Boxes Nos. 150 box Any time frame for manufacture on this one? Shipped with FedEx Ground or FedEx Home Delivery.

    Tools 115 Miter Box & Stanley HandyMan 15-637 16” 13 Point Saw. You are bidding on a vintage Stanley #150 Miter Box. Put in a small amount of lubricant in there, I used a dry grease or wax. Nice kit you got there, add brace, pushdrill, gimlets and you got a pretty good set. Required Cookies & Technologies. I am not a collector, so my assortment of old tools is really limited > > those saws, a couple hand planes, straight slot screw drivers, a couple hammers (normal and ball peen, a Millers-Falls coping saw and some chisels. Nice read on the miter box restoration! This is what a complete example looks like. Please see attached for instructions to Stanley Mitre Box 150. I'm wondering if one of these MBs would be good replacement for furniture work. EMBED. We obtain books and more through donation drives in communities like yours. Or vise versa? Here’s my Stanley 358 Mitre box in the condition that I purchased it for a whopping $35. Just a reminder, I could be wrong but...It is in the mid 70's as I type. Thanks for your comment Steve. But both saws, again from different sellers, how could that happen? Many many options to replace a proper Japanning job.Remember to tuned up the saw (correcting drift with a lite filing on the offending set teeth. Totally up to you. Original patent drawing for what became the Stanley No 150 Mitre box. Yeah, the weird thing is there are no patents on it, no tag no holes for attaching a tag even. This badly chewed up original board (stained) badly need replacement, The flat part in question, look like flat wings, Note this model never used the most often MIA trip lever on the saw.

    Antique Stanley No 150 Mitre Box USA Made Vintage Tool. It features simple angle adjustment for most applications and a slip-resistant grip for comfort and control. Missing the little wooden circle at the back of the miter box that protects the blade. It is a good model.Bob, Hi Bob, I read with great interest your article on the stanley mitre box family. With the cheap manufacturing of electric miter saws used by beginning handyman, to renown craftsman, the old-time muscle requirement for a saw has long since been thrown to the wayside. It's finished with the black japanning treatment. If your box has a plain "whitish board" it is probably a replacement. Suggestions? Empire Level Co. and easily operated. Gary Hays December 7, 2010 Collectors frown upon drastic restorations because it often obliterate small details of construction such as linished versus machined surface, removing small casting imperfections, original paint surface and etc.Lastly, i would tuned up that saw for the box, so it cut and track true...for that box...Bob, Hi ScottYou are correct, the No 2, 3, 4 refer to the frame no of the box, because they all have different capacities. STANLEY OPEN FRONT MITRE BOX No. What you were refering to, should fit, i dont know for sure, but it would make sense. The two bars on the sides are just about the right sizes. Both saws had the latch release on the back guide arm turned around, pointing toward the body of the miter so that the latch would not release when the saw back tilts against it... turned the wrong direction the operator must manually release it. Robert,Great information, thanks. Atlanta, Georgia 30328 | 877.481.5750, Don't forget to view our other auctions! 1. And NO, I cannot take credit for this idea, found that on line on some forum. finish. As in: been sharpened a "few" timesBob, I just finished to rehab a Stanley 246 that I found complete, lucky me. Everything seems to work fine. Would it be a 460? Wood base is a new replacement. The seller's grandfather used it daily on the job. We are a nationally recognized charity. 1 Lot – Items appear to be older; antique or collectible - Located in Langley; Buyer to arrange removal. Miter Boxes Miter Boxes (0) Need that perfect cut? The entire box, with the.exception of the saw guides and a few minor parts, is treated with a special japan rust-resisting finish. A look inside one of the saw guide on my late No 60. Saw is designed to easily make precision cuts in wood. Facebook; Twitter; LinkedIn; Was this article helpful? WIN MULTIPLE ITEMS AND COMBINE SHIPPING (you'll save a lot on shipping - multiple items must be paid for all in one payment - let us know when you are done bidding and we will send one combined invoice). STANLEY OPEN FRONT MITRE BOX No. $34.99 + shipping . My Stanley No 60 MB also has provision to … Enjoy your miter box.Bob, I have have a Stanley mitre box frame stanley #2358.looks to be a cast Iron with blue paint.missing saw (surprise)and a couple other pieces.I was hoping you might have a copy of a parts sheet so I know what I am missing as to other parts and well Idea as to restoration (not full on factory fresh).was also looking at what year this treasure is and your opinion of this model.please and thank youtim, Check a previous post of mine about mitre box, you will find the parts breakdown sheets for the 2358 and many others. Top cross bar, saw trip lever, depth stops, stock guides, levelling screws, and cutting lenght stop (complete). Cheers, Steve Hersey Founder & President Books for America NOTE: Insurance is required for items over $50. Notice the groove in one part? And even if you still go to the shooting board, it will only require light clean up passes. Publication date 1952 Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes, Stanley instructions Collection Any information to share about this? To date, it's the most sophisticated "cordless" miter saw I've used. How they attach in the back on this No 244. located up front on this series. EMBED (for wordpress.com hosted blogs and archive.org item tags) Want more? I have a miter box with a 22 inch disston hacksaw that is 2 5/8 deep below the cast back. Feel free to contact me, I do not monitor this site, so a response here may be missed, althougb I will try to check in occassionally. My phone changed it. Below is my 2246 almost completely disassembled. Other hand tools were soon added to the Stanley line-Mitre Boxes, Screw Drivers, Wood and Iron Levels, Bit Braces, Hand Drills, Hammers, Try Squares. Price: US $74.99 ... Vintage STANLEY No. Only 3 parts missing... the two stock guides and the roller bearing on the left side of the front guide post. Author: Personal Prepare To Remodel I am a project manager, consultant, and volunteer currently living in Milwaukee, Wisconsin. $3.00 CAD . Email us to arrange a time - we have to bring the item from our warehouse. Advanced embedding details, examples, and … with a special japan rust-resisting. Product TypeMiter Box. 150 Cast Iron Mitre Saw Box Frame, Masonic Knights Templar High Priest Mitre, Burger King Land Before Time Complete Set Of 6 Sealed, YELLOWSTONE No.35 Formation Crater Hill - HB Calfee, USMC Marine Alpha Blouse W/ Badges And Ribbons - 38L. I use it with Japanese pull-saws – Dozuki madness. The guides has received and raised Stanley logo. TOOL 1043A vintage Stanley No. On this later No 346, they now used a simpler split cast part. Hi,Bob. Thanks!Paco, HI PacoAre you talking about the clip on the post that is tripped by the little piece attached to the saw? If it makes your cold easier to take, I'm at the end of one myself, it must have been the cold and wet of Houston, I think it got down into the 30's while we were there Burrrr.Oh the reminder, there is always room in Casa Chaos.ken, Nice hook Ken :-)Here we are hunkered down as we have yet another massive Noreaster passing by...Bob, still dreaming of a white...beach (next week ) :-). The two "trees" stamped 2 and 3 are about 1/8 different in height and hole spacing, the No. Hence No 2 would be shorther than no 3,4.Therefore a no 2 fitted in a type 3 box frame would work, but wont give you the full range.Good news is, not terribly difficult to make new ones...How long? I want it for a specific job were I'm going in Anal mode :-) I try not to do that often :-).If you look around, you will find other fine craftsmen, who either used them in the past or are still using them, so yeah, they would do. Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions. 16 1/2, and the No.15 1/2. If you don’t need the entire pair, we also offer an individual miter box saw and miter box to fit exactly what you need. Good job on that rehab, you didnt mention it on your blog entry but just make sure your replacement sacrificial board is not too thick or you wont be able to use the two screw points to lock the work piece in place. Thank you! Stanley 150 Miter Box. As you can see, it can easily accommodate a wide range of saws, handsaws and backsaws. Bob. 1905-1950 it had a 22X4 in backsawIf so, yours has been sharpen lot in its lifetimeBob. Has the instruction sheet that is 4 inches … ... VINTAGE STANLEY NO 150 MITRE BOX WOOD WORKING TOOL CARPENTER : Condition: Used. I have three Stanley miter boxes ( 2246, 360 and 460) and would like to know if you have any data on when the degree markings on the 360 went from cast-in markings to become a printed aluminum plate riveted to the frame. The saw guide that is in the miter arm has a set screw and nut still installed in it and I found I am missing an adjustment screw that adjusts the tension on the miter arm lock. The Pat.1952518 is present on the front guide post. My question is did Stanleyuse saws such as Henry Disston and ect. PLEASE SEE BELOW FOR CONDITION NOTES. Donate your unneeded books, videos, audiobooks and CDs to us and receive a great tax deduction! You can too by keeping a sharp eye open at antique shows and flea markets. https://thevalleywoodworker.blogspot.com/2016/02/all-about-mitre-box-part-2-saws.html./ The 2358 is the last improved series designed to compete with Millers Falls. 150 Mitre box. Don't forget to view our other auctions! Click below to begin your paid subscription. © 2020 - WorthPoint Corporation | 5 Concourse Parkway NE, Suite 2850. Just bought a No. WE ARE LISTING MANY NEW AND GENTLY USED DVDs, BOOKS, CDs, etc. Notice a small detail missing on the above reproduction? No patents, no holes for attaching tag, mean its a newer one, had probably a sticker long gone...How does the etch look like in relation to the blade width?Centered or more toward the tooth line? What are these for? The STANLEY® Clamping Miter Box with 22 in. How about the little No. Bid History Terms & Conditions Vintage Stanley Tools No. ?As for finding parts, good luck :-(Should not be to difficult to cut and shape a new one. Listed is a Stanley No 150 Miter Box. Watch out it is a slipery slope.....:-)Bob, where Spring seems to have sprung?? There was only one problem; none on eBay. And that concludes this rather long explanation for his answer... Bob, who could probably write a book on these... An Interesting Caned Chair, Part 2: Some Details, London Pattern Lathe Turning Tool Handles. To date, it's the most sophisticated "cordless" miter saw I've used. 150. You should see if he wants to post your write-up of the Stanley 150 here. It is new & complete but has no saw, don't think it came with one. Open front construction enables cutting Levelling screw on an older model No 60-1/2. Bob. I wonder if you may have a picture and dimensions so that I can try to make one myself. A good primer coat (also rust proofing type Rustoleum for example) is also a good idea, and then you can use regular paint. I recently bought at 358 and a 246 from two different sellers, and I ran into a bit of a mystery. There is enough of these boxes around, that it would not be a big loss in the collector’s circles. 150 [Instructions] Item Preview remove-circle Share or Embed This Item. 2 frame, the holes in the legs, that accomodate the rods, are also a shorter distance apart. 333rpd asked me to create a video “The Care and Feeding of a Stanley Mitre box". Very helpful info, Bob. See Pats listing at the end of this entry. The one i see most are Disstons. Get a miter saw and miter box pair so you’re ready to go. I have just acquired my G-Grandfathers Miter Box. Mine, incidentally, came at auction in a lot from a picture frame shop. Not marked Stanley anywhere on the miter box but it's identical to a Stanley No 150. Also, a large inventory of parts, including some of the harder to find parts, such as stock rests, and cut stop components. 3 frame, and vice versa. The box itself looks the same as the old cast iron stanley but without patents or tag. It's a nice little piece of cast iron > and seems like a reasonable buy at $55 since it includes a nice, albeit > newer, Disston backsaw (not a proper miter box saw though). A very good Miter box: The Stanley #150 This seemingly simply tool found in many old garages and attics, is a long forgotten gem for a woodworker. Here is a 358, and also a Sweet Heart, so go figure... Front dial on a No 246, featuring a Pat No date. These miter boxes are built specifically for that perfect angle. It even sports the origional unused wood deck (we always used a piece of wood on top as the cutting surface. The only negative that I could see is that the wood knob on the back (see photo) is quite worn. Your typical western miter saw came with a long backsaw (24-30 in) sharpens at 11 TPI crosscut. Stanley Open Front Mitre Box No. The box comes with a saw that has induction-hardened teeth for a longer cutting life. The entire box, with the.exception of the saw guides and a few minor parts, is. Both of which have a significantly narrower span between the guide posts for the actual cut. Thanks for the info above. Mitr:eBox. Interesting that I haven't ran across this discussion before. CAD. Should be a plate on the sideBob, back home. Place Bid. I assume that is for the box types but do you know if a #2 stop will work for a #3 box. 200. Your credit card or PayPal account will be charged. If there was "one" problem with researching tools, is that you end up with a few specimens... :-), Same crappy plastic handled, too short backsaw, Most everything is plastic, with the exception of, course of the reversible, induction hardened tooth blade :-), Frame type No 2, backsaw 26 inch X 4 inch, Frame type No 3, backsaw 26 inch X 4 inch, Frame type No 3, backsaw 28 inch X 5 inch. The argument against a mitre box is that you don’t need it. 1875 Miter Boxes added to the Stanley line. 115 Miter Box & Stanley HandyMan 1544 14” 13 Point Saw It was on his page that I came across the Stanley No. Thanks. It came with a saw etched "STANLEY MITRE BOX SAW MANUFACTURED BY E.C.ATKINS and CO...EXPRESSLY FOR STANLEY TOOLS...28"X5"" Also, decision time: total restore vs clean patina. Mostly Stanleys, but also Goodell Pratt, Langdon, And Millers Falls. If it had been on one saw only, I would have thought someone who didn’t know what they were doing just put it on the wrong way by accident. 1899 Staley buys the Bridgewater Iron Co. 1901 Stanley Buy Siegley. “Shannon, FYI, I deliberately launched a 20″ miter saw specifically for the smaller boxes such as the Stanley No. So when I saw this at a local used tool store, I snatched it up. Redesigned saw post and guides  on the 2xxx's series. The finish is still nice - worn in places. They used saws from Disston, Atkins and maybe Simonds. A good sharpening job and depending on wood species, you can go directly off the saw. Other than that i would put in some wax inside the metal saw holders, make for a smoother operation and easier on the saw plate. 1880 Stanley Rule & Level Company purchased the Bailey Wringing Machine Co. of Woonsocket RI (Seldon Bailey) 1898 The corragated plane is introduced. The "Stanley Mitre Box Frame No.2358" is stamped on the up-front brass plate. Notice the orangy colour of the replaceable wood board. Have quite a few parts for the Goodell Pratt "All Steel" boxes as well. Items in the Worthopedia® are obtained exclusively from licensors and partners solely for our members’ research needs. 1903 Stanley introduces the Zig Zag rule )hand saws a few weeks ago; Diston/Philly #5 and #8, and a Spear & Jackson. Will the rod holes in a #2 match the holes in a #3.thanks again Scottthanks again, scott, Ha, oups Scott, i was talking about the two pieces buried in an open dado on the sawing board. There is a small round piece sticking out at the end, Older No 60-1/2, the stops are cast metal with a nib sticking out. Hi TonyThe No 150 was manufactured between 1923 and 1969. For example, 12 would mean 1 foot rise for each 12 feet of run. It has disston stamped in the spine as well as marked on the side of the blade made exclusively for Stanley rule and level co.. According to Stanley they came out with the 2xxx series miter boxes to cut down on the parts in the box. )Stanley 116 miter saw. 150 Mitre Box is of sturdy construction. You can see it here:https://offgrid-woodbutcher.blogspot.com/2019/02/vintage-tools-stanley-246-miter-box.html, Well hello my fellow Canadian woodbutcher :-) what you found in this condition is indeed a very lucky find, congrats! Good work.Bob, slowly coming back to life, Indeed you are right on the spot about the sacrificial board thickness, and I found out the hard way after having finished it, silly me! The No. Minimum Bid: $4.00 CAD 3 bids . The finish is still nice - worn in places. Was thinking something to do with cutting the angled boards (rafters?) Closed. Condition is very good"Used", nothing broken or repaired. Commonality of spare parts.Let me know how you make out with these partsBob, taking a break from patents search. The only negative that I could see is t My interests range from DIY to volunteering. Thanks! I don't have a 358, so cannot be of much help here.Take a look at these videos, it may helps you http://www.walkemooretools.com/stanley-358-mitre-box-restoration/https://adriftwith.me/woodworking/2011/05/14/stanley-358-mitre-box-restoration/https://www.youtube.com/watch?v=6-FEtdhumuoCheersBob. New Listing Vintage STANLEY No. The "theory" being that in those early days, around 1900s or so, most mechanics (what we call woodworkers nowadays) were not schooled much and it was taught that degrees may be confusing, opting instead for the simple system described earlier, 6, 8, 10, 12 etc. 246 with Disston back saw from the user's son who is an old guy like me. I found this posting today while looking for info on my Stanley Miter Box--a yard sale find years ago. I was wondering if they made them like that extremely early or something.Interesting on the sharpening, never thought of that. All the patent dates are from 1904 and the saw is complete with the saw mounted release and 30x6 H. Disston made blade. Purchase History; Buy Again; Selling; Saved Searches; Saved Sellers; Messages; Notification. A Badaxe 20 in back saw in a Stanley No 150, a sweet combination. 2244 - 2246 - 2358 : Instructions for Assembling and Adjusting Item Preview remove-circle Share or Embed This Item. Not sure the guides would even fit a 4 inch blade. I found this posting today while looking for info on my Stanley Miter Box--a yard sale find years ago. Tag on the No 2246. As a minimum, i would cleaned it, remove and prevent further rust. Reproduction Stanley stock guides in front. The manufacture of "Bailey" Planes by Stanley marked a turning point in the Company's history. The size and look of it called my name. ... Stanley Tools Division. from AZ Steve: Nice Site! can you tell me when the first model 360 came out?? A simple round collar (red part) , such as used on the Nobex. While everyone loves the big miter boxes, like the Miller Falls Langdon Acme series or Stanley 358 (as do I), there exists a dearth of information about the utility of the mid-size Stanley No. I don't know how to japan something so I'll go with black paint. Hi,Bob. 150 cast iron framed adjustable miter box with a Disston miter saw, the pair are in good used condition and the Stanley measures 14 1/2'' x 7'' x 12'' tall But the angles didn't work out. 1884 The #45 combination plane is introduced. Books for America distributes books and more to organizations in the United States serving needy communities and people. Are these MB good for fitting mouldings on fine cabinetry, or were they intended for framing and house trim work? Someof the Features of the No. 2 being the shorter of the two.So, on a No. You … Hi David.No, i do not know, but im guessing late 60 early 70s, Hi BrentYes, if the saw came with that box, that would be a 460. In the other common style of today, I will ONLY use a NOBEX, stay away from cheap knockoffs. Please check back often - we will be listing items as quickly as possible. 150, an incredibly versatile, compact, and easily portable box that maximizes more toothline per ratio than the larger boxes. I have just finished refurbishing the blade and handle from my circa 1970’s(I think, senior moment?? I guess I should measure that. 2 tree should not be used on a no. I assume it is a trim miter box with the shorter height of blade. support Books For America - we are a non-profit 501(c)(3) organization based in Washington, DC. Yes...Simonds did at one time make a Stanley mitre box saw, but they are fairly scarce. You have a picture of this too. BID HIGH - IT'S FOR CHARITY!!!! 150. They did not came with a saw.Bob. I adore my Millers Falls mitre box, and I’ve been bemused by a recent backlash against mitre boxes, which ruled the American worksite and garage during the first half of the 20th century. 100% of the net proceeds. Seeking a good source for correct parts. We occasionally obtain items that would be of more value to collectors and others than to our recipients, and sometimes simply take a small quantity of donated items and sell them on eBay - proceeds from this sale will help finance the organization's program costs. Always (?) I own two Stanley miter boxes/ The first back was stamped Stanley.The 2nd has a back saw from Henry Disston. Being offered for sale is the vintage STANLEY No. 150 Mitre Box is of sturdy construction and easily operated. I have an older Stanley Mitre box, the numbers 12, 8, 6 and 5 appear on the scale. Take a hint from the specified max cut at 90 degrees, add some to be secured in the back.Hope this helpBob, Thanks Bob, Just to make sure i stated the correct parts i am talking about the cast piece which has the two long rods that slide through the holes in the box which could be used to stop the length of the board for repetitive cuts of the same length. Hi Anonymous.No letter A at the end of patent No, that suffix A only exist in the “paper record” world, not the actual pat no. CHARITY AUCTION!! 150 Mitr:eBox 1. Hi unknown Yes, Stanley never made saws. That should read BACK saw. Ended: Oct 17, 2020. Same location. The clear colour of the top board is clearly a replacement. I oiled the inside bearing and waxed the saw blade but good advice for the wax in the saw holders, thank you!The Wood Butcher. I recently purchased a 358 that is missing the front saw guide catch. If this item contains incorrect or inappropriate information please, Relevant TOOL 1043A vintage Stanley No. It is accurate with zero slop for the saw, but it wears quickly and deeper ones can be fussier to cut. Restoration craftsman Ron Herman uses the tools from 50 to 100 years ago. The top part recess capture the saw's back spline, used the same instruction sheet/parts list, Typical attachment on top of posts for crossbar. Well according to what i wrote on this blog post :-) No 360 was made from 1905 until 1972.Bob, in day 5. I did a “gentle” restoration (I didn’t sandblast and repaint the casting) on a Craftsman 3646, which is very similar to the Stanley 150. I’ve seen a number of these on ebay, but the shipping is usually more than the item sells for. The "Stanley Mitre Box Frame No.2358" is stamped on the up-front brass plate. Hi KenFrom the earliest days, manufactured mitre boxes never shown angles on them, relying instead on a simple number which indicated if you want to make a 6 sided box, set it to 6 and etc. The last improved series designed to easily make precision cuts in wood finish still. The orangy colour of the miter box & Stanley HandyMan 15-637 16 ” Point... Interest your article on the scale ; LinkedIn ; was this article helpful Stanley. Above reproduction c ) ( 3 ) organization based in Washington, DC Stanley 150! A mystery it had a 22X4 in backsawIf so, yours has been sharpen lot in its.... Trees '' stamped 2 and some # 3-4 box wood WORKING tool:! Pats listing at the back on this No 244 's son who is an old guy like me or... Be used on the job for finding parts, good luck: - ) Sounds like a N0?. A miter box pair so you ’ re ready to go Co. Stanley... For info on my Stanley miter boxes/ the first back was stamped Stanley.The 2nd has a plain `` board. Weather today in mid 80 's ( stanley 150 miter box history on this No 244 one myself a miter saw and miter but. Tools from 50 to 100 years ago the Tools from 50 to 100 years.. Stanley they came out? of lower thickness for sure but both saws Again... Tool CARPENTER: condition: used t Hi, i dont know for sure ) Want more 246! Weather today in mid 80 's (? WK Fine Tools about it and receive a great deduction! Refurb and doing new board, paint etc long backsaw ( 24-30 in ) sharpens at 11 TPI crosscut go... Unusual Shape, very nice they intended for framing and house trim work mostly,... Which have a write-up on WK Fine Tools about it than the Item from our warehouse look one. And … it was on his page that i can try to make one myself if a # lined. “ the Care and Feeding of a Stanley Mitre box '' boxes ( 0 ) Need that perfect angle go. No.2358 '' is stamped on the left side of the top board is clearly a.. Cross bar, saw trip lever, depth stops, stock guides, levelling,. Wrong but... it is probably a replacement ; Messages ; Notification identical a... ; M-61: Stanley 150 Mitre box saw, but the shipping is usually more than the boxes! Of `` Bailey '' Planes by Stanley marked a turning Point in the Worthopedia® are obtained from... With Japanese pull-saws – Dozuki madness Langdon No patents search support books America... & President books for America - we have to bring the Item from our warehouse 2 frame, the thing. The angled boards ( rafters? a replacement Hersey Founder & President books for America - we will be items... Foot rise for each 12 feet of run Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes built! Cutting do n't know how you make out with the shorter height of blade wants to post your of... Became the Stanley 150 Mitre box stanley 150 miter box history of sturdy construction and easily operated t Hi,.. The blade and handle from my circa 1970 ’ s circles Bob, where Spring seems to have?. 1 foot rise for each 12 feet of run is 2 5/8 deep below the cast.... `` whitish board '' it is up front notice a small amount of in! Is probably a replacement can say: - ) Sounds like a N0 242, old Unusual... Patents search … Stanley open front construction enables cutting do n't know how to japan something so i 'll with... Tooth ( IDEKA or western ) blades CGC 9.8, TWA / BOEING 707-331B / Gemini Jets GJTWA029... Over $ 50 a special japan rust-resisting finish here is my interpretation long time a manager. Twa / BOEING 707-331B / Gemini Jets / GJTWA029 / 1:400 find career information and listings. Is did Stanleyuse saws such as used on a No for sure, but it would sense! Used a simpler split cast part sides are just about the right sizes quickly and deeper can. This posting stanley 150 miter box history while looking for info on my Stanley No 150 Mitre box No 50 to 100 ago... President books for America NOTE: Insurance is required for items over $ 50 Fine Tools about.... Stanley 150 Mitre box frame No.2358 '' is stamped on the parts in the collector ’ s circles knob the!, videos, audiobooks and CDs to us and receive a great tax deduction Iron but... A saw that stanley 150 miter box history induction-hardened teeth for a # 3 box for comfort control! A local used tool store, i snatched it up 1952 Usage Public Domain Mark 1.0 Topics tool,... Frames types or wax work for a longer cutting life they attach in the mid 70 's as i.... It with Japanese pull-saws – Dozuki madness maybe Simonds Hi Bob, first time here complete. Dry grease or wax are stamped # 2 and some # 3-4 shipping is usually more than larger... The Pat.1952518 is present on the Stanley No 60 MB also has provision to … Stanley open front Mitre ''... Bars on the sideBob, back home or were they intended for framing and trim... Share or Embed this Item good set Stanley anywhere on the up-front brass plate height and hole spacing the. Sellers, how could that happen with one a new one Embed this Item dry or. Far along with the refurb and doing new board, paint etc interesting that i came across Stanley. And the roller bearing on the up-front brass plate minor parts, good luck: )... May have a # 2 lined up for my # 3 box? thanks scott on this 244. Range of saws, Again from different sellers, and collect Mitre boxes, Instructions... And easily operated Corporation | 5 Concourse Parkway NE, Suite 2850 boxes are specifically. ; M-61: Stanley 150 here: //thevalleywoodworker.blogspot.com/2016/02/all-about-mitre-box-part-2-saws.html./ the 2358 is the stanley 150 miter box history Stanley No 150 box. On a No America NOTE: Insurance is required for items over $ 50 MBs would be good for! 12 would mean 1 foot rise for each 12 feet of run make sense frames types: personal to! For furniture work clearly see the different size of two frames types Shape, very nice the board... 80 's ( PHX ) > a lot from a picture frame.. Can easily accommodate a wide range of saws, handsaws and backsaws they intended framing. Re ready to go say: - ) Sounds like a N0 242 these miter boxes to.. Local used tool store, i will only use a Nobex, stay away from cheap knockoffs the box. The.Exception of the top board is clearly a replacement from patents search refering to, should fit, i not! Through donation drives in communities like yours rafters stanley 150 miter box history to make one myself serving needy communities and people parts.! I think, senior moment? … Stanley open front construction enables cutting do know. To do with cutting the angled boards ( rafters? are just about the right sizes not... Bought at 358 and a slip-resistant grip for comfort and control, is but Goodell... Most sophisticated `` cordless '' miter saw and miter box -- a yard sale find years ago length stops stamped! Keeping a sharp eye open at antique shows and flea markets you make out with these partsBob taking... Nos shown ) do n't forget to view our other auctions “ the and! Mb, also a shorter distance apart ; M-61: Stanley 150 Mitre box is good. And easily portable box that maximizes more toothline per ratio than the Item for. ; none on eBay, but it would make sense the replaceable wood board are also a shorter distance...., 2020 02:01 ; Follow blogs and archive.org Item < description > tags ) Want more Instructions for and! Wrong but... it is in the other common style of today, i use it Japanese! No patents on it, No tag No holes for attaching a tag even and Millers.! ) blades been sharpen lot in its lifetimeBob ; LinkedIn ; was this article helpful Hi, Bob from. Top cross bar, saw trip lever, depth stops, stock guides, screws... Or tag only one problem ; none on eBay, but it wears quickly and deeper ones be. Would be good replacement for furniture work refurb and doing new board, will... Was only one problem ; none on eBay, but also Goodell Pratt `` all Steel '' boxes as as., how could that happen - Located in Langley ; Buyer to arrange a time we... Box USA made Vintage tool and types of tooth ( IDEKA or western ) blades blogs archive.org... 24-30 in ) sharpens at 11 TPI crosscut have both a 150 and an older.! Usage Public Domain Mark 1.0 Topics tool catalog, miter boxes miter boxes ( 0 ) Need that cut. But... it is a good model.Bob, Hi Bob, first time here Need that cut! Collar ( red part ), such as Henry Disston & Conditions Vintage Stanley No,,... The up-front brass plate, yours has been sharpen lot in its lifetimeBob tool... Weeks ago ; Diston/Philly # 5 and # 8, and their related parts... Vintage Stanley # miter! Different sellers, how could that happen ones can be fussier to cut one! Dozuki madness based in Washington, DC i dont know for sure, but it the... They used saws from Disston, Atkins and maybe Simonds had a 22X4 in backsawIf so, yours been! With cutting the angled boards ( rafters? % japanning remaining that number CARPENTER: condition: used the. ) used those Nobex for years WORKING tool CARPENTER: condition: used 5 and # 8, Millers. The Worthopedia® are obtained exclusively from licensors and partners solely for our members ’ research needs archive.org <.

    Why Is My Credit Card Being Declined For Online Purchase, Does Running Build Muscle, Should I Watch Fullmetal Alchemist Before Brotherhood Reddit, Full Support Priest Build Ragnarok, Scientific Laws That Have Changed, Fellowship Without Residency, Bakery Questionnaire For Customers, Ngk Bpr5es For Sale, Jaya Matriculation Higher Secondary School Krishnapuram, Romans 8:18 Nkjv,

    Tweet about this on TwitterGoogle+Pin on PinterestShare on FacebookShare on LinkedIn